The touchpad on a laptop is needed so that you can use it without connecting a mouse, which is convenient on the road or when the device is on your knees. Sometimes the touchpad refuses to work this can happen due to accidental shutdown by hotkeys or a settings failure. In most cases, enabling the touchpad on a Lenovo laptop is easy just knowing which settings need to be changed.
Table of Contents
advantage of touchpad over mouse
As a replacement for a conventional mouse, the touchpad has advantages and disadvantages. First of all, it should be borne in mind that a laptop is a portable device, which is often preferred precisely because of its autonomy and mobility. In conditions where there is no flat surface for installing a laptop, the ability to use it without a mouse is very important.
In modern laptops, the touchpad is convenient and allows you to perform all the necessary actions:
- Open the context menu.
To do this, you need to press the button at the bottom of the touchpad or click on the touchpad with two fingers. - Scroll the page.
The mouse wheel replaces two-finger sliding on the touchpad. - Select text.
If there is a button / buttons at the bottom of the panel, you need to hold down the left one, hovering the cursor over the beginning of the intended selection, and without releasing, slide another finger over the sensor. Alternatively, you can replace pressing the button with a double click on the touchpad.
But the touchpad also has disadvantages, which may cause the need to disable it:
- high sensitivity – the cursor reacts even to an accidental touch, for example, with a sleeve;
- the impossibility of fast and accurate work, which is especially noticeable in games;
- risk of accidental pressing when using the keyboard.
In addition, some cheap laptop models come with poor quality touch panels that periodically fail, respond inadequately to user actions.
If you are Asus user and have same problem here is How To Turn Off Touchpad On Asus Laptop?
How To Enable Touchpad On Lenovo Laptop?
Depending on where the laptop is used and user preferences, the touchpad can be activated/deactivated during the initial setup of the device or turned off when a mouse is connected. The most annoying thing is when the touchpad suddenly fails, especially if only the keyboard is available to correct the situation.
How Do I Enable My Touchpad On My Lenovo Laptop?
The easiest way to turn on the sensor on a Lenovo laptop (or any other). First, check for a dedicated button next to the panel. If it is not there, inspect the touchpad itself, in the corner of which there may be a small depression or a point that activates the sensor when pressed.
In addition, there are hot keys to control the touchpad, usually from the functional row. On Lenovo laptops, enabling and disabling the sensor is usually controlled by F5, F6 and F8, the desired button is often distinguished by an icon depicting a panel. If a simple press on the key does not work, it is recommended to try holding it in combination with Fn.
How To Enable Touchpad On Lenovo Laptop in bios?
Sometimes the inability to activate the touchpad is associated with the BIOS settings. To correct them, you will need:
- Open BIOS. To do this, when you turn on the laptop, you should start pressing a certain key – for Lenovo, it is more often F1, F2, or Del. You can get a hint at boot time – before the OS splash screen appears at the bottom of the screen, there is a line “Press {button} to enter SETUP”, where {button} is the required button. Users of Windows 8 or 10 will need to first disable Fast Startup in the settings.
- After opening the BIOS menu, go to the Advanced tab, where you can find the “Internal Pointing Device” item, set the value to “Enabled” (or “Disabled” if the touchpad needs to be turned off).
- Save changes by pressing the key indicated at the bottom of the screen near the “Save and Exit” line – F10 is often used.
The laptop will restart, after which the touchpad should be activated.
You may also like Best Lenovo Laptop For Students
Connection in Windows 7 and 10 settings
Changing the OS parameters is carried out using the “Control Panel”, where you need:
- Open the “Mouse” section.
- A window will open where you should go to the “Device parameters” tab, it can be replaced by “ELAN”.
- In the upper part of the window there is a list of devices where you need to select and click the touch panel. Its name may contain the words “Synaptics”, “TouchPad”, “ELAN”, “ClickPad”.
- If the “Enabled” or “Enable” button is active below, press it.
- If necessary, check or uncheck the box that disables the sensor when an external mouse is connected.
Here, by clicking on the button “Settings” or “Settings”, you can adjust the sensitivity of the touchpad, scrolling.
Windows 10 offers another way to open touchpad options, to do this:
- Open “Start”.
- Expand the “Options” section.
- Click on the “Touch Panel” item.
If the touchpad does not work, and there is no way to connect a mouse, the key with the Windows icon will help you get to the Start menu.
Check also Best Lenovo 2 In 1 Laptops
Why is my touchpad not working on my Lenovo laptop?
Touchpad failure is not always caused by OS or BIOS settings. If it’s easy to disable the touchpad on any Lenovo laptop model, then there may be problems with activating the sensor.
Why can’t I enable my touchpad? How to fix it
The most unpleasant is the physical breakdown of the laptop’s sensor since its elimination requires contacting a service center. But more often the problem is caused by faulty software, for example, outdated or missing drivers. To update them you need:
- Open “Device Manager”. You can find it in the “Start” menu or hold down the Win + R combination and enter the command “devmgmt.msc” in the window that opens.
- In the section “Mice and other pointing devices” find the sensor.
- Right-click on the required line, select the option “Remove device” from the context menu items.
- In the upper part of the window, find and expand the “Action” tab, click on the “Update configuration” line.
If Windows does not find a suitable software, you will need to download and manually install the driver for a specific laptop model from the official Lenovo website.
Check it out Why Laptop Won’t Connect To Tv HDMI?
In addition, problems with sensor activation may be associated with mouse connection. If the touchpad works when you disconnect the device, you will need to change the settings to fix the problem. Namely, in the mouse settings, uncheck the box that allows you to disable the touch panel when connecting an external device.
In most cases, enabling and disabling the touchpad is not a problem. Some physical problems (for example, if the touch panel cable has flown out) can be fixed by yourself, but parsing the laptop without the necessary skills can lead to new malfunctions and loss of warranty. Therefore, if the adjustment of drivers, mouse parameters and BIOS did not work, it is recommended to contact a specialist.
