Lenovo laptop freezes and gets very hot during operation one of the most common problems with this type of technology. In order not to provoke overheating of the laptop (monoblock) and damage to the ventilation unit and processor, the device must be cleaned of dust. You can find lenovo laptop overheating solutions yourself or can contact a service center.
What to do if the Lenovo laptop gets very hot?
If Lenovo laptop overheats during operation , you can take the following steps:
- Cleaning Lenovo laptop from dust. You must turn off the device and carefully remove the battery, then carefully disconnect the ventilation system (usually secured with seven screws). Clean the part well with a brush or a cotton swab, do not put it under water.
- Replacing the motherboard. Its malfunction can lead to damage to the processor, cooler and cooling module bridges. Doing it yourself will be quite problematic. Thermal paste may need to be replaced.
- Lenovo monoblock heats up due to a faulty cooler. You can try to take it apart or replace it with a new one. Do this very carefully so as not to damage other parts.
- Infection of a Lenovo laptop with viruses, due to which it often overheats. The best way is to install a licensed antivirus program to quickly destroy the virus without losing important data.
- The laptop heats up due to the installation of “heavy” programs for which the device software is too weak. The easiest way out is to remove the programs or replace them with more suitable ones.
- Cooling system malfunction.
If your laptop need cleaning here is Get Laptop Professionally Cleaned at home.
Lenovo laptops Dust cleaning
If your Lenovo laptop or all-in-one starts to freeze, slow down during operation and boot poorly, it’s time to clean your Lenovo laptop .
What can you do yourself?
Regular cleaning of Lenovo is very important, otherwise the device (including the all-in-one) will severely freeze and overheat during operation. What you can do to clean Lenovo yourself:
- Detach the rear cover (fixed with 4 screws) and remove the battery.
- Lenovo’s cooling system is located under the cover. First you need to unscrew the bolts that secure the cooling device, then remove the cooler and the cooling tube.
- Using the reverse mode of the vacuum cleaner, blow out the laptop cooler and put it aside. Do the same with all the details in order to properly clean Lenovo.
- Take out the cooling system, remove the old thermal grease and apply a new one with a thin layer.
- Reinstall all accessories. It is important that no thermal grease gets on the cooling system. Thermal paste dries quickly if the equipment is misused.
Regular cleaning of your Lenovo notebook computer helps protect it from frequent freezes during operation and booting, strange noise, and overheating. Dust gets into the device through the gaps between the keys, USB and charging connectors.
You may also like Uses Of Laptop In Our Daily Life.
Replacing thermal paste of Lenovo laptop
Over time, Lenovo laptops begin to make noise and overheat during operation. This is a sign that the time has come to replace the thermal paste on Lenovo technology, which has dried out and prevents the device from functioning normally.
How to replace thermal paste on Lenovo at home?
Thermal paste is applied to the cooling system over the thermal pad and protects the laptop from overheating and loud noise. Over time, the liquid metal dries up and the thermal grease needs to be replaced in order for the device to return to its previous pace of operation. As a preventive measure, it is recommended to regularly clean the laptop and monoblock from dust , as well as try to prevent it from heating up.
What you can do yourself to replace thermal paste on a laptop (monoblock) Lenovo :
- First you need to unplug the device and turn it off. Gently slide the bottom panel out and remove the battery. It is attached to the device body with a latch.
- Then unscrew the screws (7 pieces). Better to put them in a special box so as not to lose.
- Disconnect the bottom of the laptop. The cooling system will be immediately visible. It must be carefully pulled out, disconnected from the wires and cleaned of dust. For convenience, it is best to use a soft brush. Before that, you should remove the RAM bar.
- Carefully peel off the old thermal paste to replace it with a new one. Leave the thermal pad in place (if it is damaged, it will also need to be replaced).
- Apply new thermal grease and reinstall the cooling system.
- Re-assemble all laptop components.
